SteadyCurve 2.0 Magnetic Band Saw Template Guide

Position SteadyCurve 2.0 on your band saw table with the amount of blade offset you want, lower the lever to engage the magnets and you’re ready to cut. Instead of trying to follow a traced-out line, just keep the pattern against the SteadyCurve as you move along the curves…just like you do on the router table. 

SteadyCurve 2.0 comes with replaceable template followers for 1/4" and 1/8" blades and works with any band saw with a cast iron or steel table and at least 12" of throat clearance. There are optional template followers for 1/2" and 3/4" blades. 

Look at these exclusive SteadyCurve 2.0 features:

• Magnetic base locks SteadyCurve 2.0 to your band saw table. 

• Template follower adjusts vertically for material as thin as 1/4" and up to 4".

• Thermo-polymer template followers won’t damage blades and are easily replaced when worn. 

• Works with all 12" and larger band saws…with or without table extension. 

• Corrosion-resistant materials and finishes used throughout for a lifetime of service. 

SteadyCurve2.0 works with all types of templates, commercially made or shop made, plastic, MDF or plywood. Whatever attachment system you’re using for your router will work for SteadyCurve 2.0, as well (we prefer double-faced tape). SteadyCurve makes every contoured project go faster and smoother, and your finished parts will be more accurate.

Like all Woodpeckers products, the SteadyCurve 2.0 Band Saw Template Guide is precisely machined and carefully inspected in our Strongsville, Ohio, facility just south of Cleveland 

Protected by US Patent No. D1,054,885.

WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov