Simple Set Fence Gauges - Closeout

Repeat Cuts: Don’t you hate it when you have your rip fence set for a certain critical cut, but you have to change it for something else? When you need to come back to exactly the same dimension later, don’t rely on the scale (it will very likely let you down). Slide a Simple Set in the track and set the probe to the fence. When you need the fence back at exactly the same spot, just slide the Simple Set back in the track and reset your fence. 

Use a Simple Set to check your saw blade to miter slot alignment. Just touch it off at the front of the blade and then check it at the back. U.S. currency is a very reliable .004" feeler gauge if you need to gauge just how far out your blade is. 

We built Simple Set to work with any table saw that has a miter slot nominally 3/8" x 3/4". Using the same patent pending design found in our Exact-90 Miter Gauge, leaf springs keep the miter bar in perfect position whether your slot is dead-on, a little too wide or a little too tight. The two-piece stainless steel rods and threaded brass points give you the flexibility to have just the right amount of length for any alignment job, from 1/2" up to 19" from the edge of the slot. To use Simple Set even further from the fence, you can add the optional Extension Kit which gives you an additional 24" of reach for a total of 43". The Extension Kit also includes a bridge to support the extended rod and keep everything in line.

Simple Set Fence Gauges are sold as a pair. When you’re not using them, store them right in plain sight and ready for the next job with the included wall-mountable Rack-Its™

Like all Woodpeckers products, Simple Set Fence Gauges are precisely machined and carefully inspected in our Strongsville, Ohio, production facility (just south of Cleveland).

WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov