Iron-Grip Small Parts Holder

Works with All Router Tables and All Router Bits

When you're using a bearing-guided router bit, Iron-Grip moves your hands out of the way and effectively makes your workpiece "bigger" by clamping it in the same plane as the 3 aluminum clamp blocks. Depending on the profile of your router bit, parts as small as 3/4" x 3/4" can be gripped securely and routed safely. 

We built in another time-saving and accuracy-improving feature. Install the threaded stop pins in a set of holes in the jaws. Now the extension of your workpiece beyond the jaws is set and repeatable, no matter how many pieces you have to rout! There are 5 sets of threaded holes in the jaws for the stop pins, ranging from 1/2" from the edge to 3-3/4" from the edge. When you don't need the stop pins, they store conveniently on the outside of the jaws. 

Since bearing-guided router bits aren't the only toys in the box, we added a fence guide to the Iron-Grip. No matter how narrow your workpiece, you can rout it safely across any straight bit. Just align your stock and the fence guide to the fence. The fence guide slides along the fence, carrying your narrow workpiece perfectly through the cut.  Most of us have learned the trick of backing up our workpiece with scrap stock to prevent backside tear-out and Iron-Grip's secure clamping and positive alignment makes that a snap.

The standard fence guide that comes with Iron-Grip will handle depth of cut to 1-1/2". If you want to cut half-laps and tenons over 1-1/2", the Extended Fence Guide will take you out to a full 3". 

Like all Woodpeckers tools, the Iron-Grip Small Parts Holder is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland).

WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov