in-DEXABLE Miter Gauge

Woodpeckers in-DEXABLE Miter Gauge

All New Micro-Adjustable Flip Stop Re-designed from the inside out, this new flip stop is rock-solid when locked. The adjustment is smooth and fluid with minimal backlash. A spur fits back into the fence so mitered ends can't lift the stop. This stop is fully compatible with the Exact-90 Miter Gauge, too.  

Graduated Fence with Extension The heavily-ribbed extruded fence carries the stop out to 18" when closed or up to 31" when fully extended. When you need the fence extended, you don't have to go back to using a tape or rule. Just lock the stop on the "EXT" mark and set your dimension on the extension bar.  You have your choice of inch or metric graduations on the fence.

Compatible with Woodpeckers Flop Stop When you pull a miter gauge with a long fence back off the table, gravity tends to take over and the fence twists to the left. When we designed the Exact-90 miter gauge, one of our engineers came up with a brilliantly simple solution. An adjustable pin rests on top of the material and keeps the miter fence where it belongs. We decided to name it for exactly what it does…it stops the flop. 

Indexed Stops and Hairline Reticle One simple button precisely sets the angles for common polygon miters and square. Just press the button and turn the protractor. The tapered pin locates your angle precisely and holds it while you tighten the handle. For all other angles there's a laser-engraved hairline on a crystal-clear acrylic window. Just align laser-line to laser-line and you'll get a perfect angle.  

Leaf Spring Miter Bar with T-Slot Retainers Leaf Spring Miter Bar with T-Slot Retainers Table saw miter slots vary from brand to brand and saw to saw. Even worse, poor machining and decades of use can lead to slots that vary. Our patented leaf spring miter bar adapts to any table saw with a "nominal" 3/8" x 3/4" miter slot…even if the slot is a little too narrow, a little too wide or varies from end to end. The 4 springs keep pressure against the wall of the slot and adapt to any changes, keeping the bar perfectly aligned.  If your table saw has a T-slot, a pair of retainers keep the bar from falling out when extended off the table. If you don't have a T-slot, the retainers come off in seconds. 

Converts to a Miter Sled If you prefer a miter sled to a miter gauge, you can add the Miter Sled Upgrade Kit to your in-DEXABLE Miter Gauge. Now your material is fully supported and not sliding along your table surface. There's an optional off-cut catch table, too. 

Like all Woodpeckers products, the in-DEXABLE Miter Gauge is precisely machined and carefully inspected right here in our Strongsville, Ohio, facility (just south of Cleveland). 

WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov