{"title":"Woodworking Jigs","description":"\u003cp\u003eWoodworking jigs help make common shop operations more accurate, repeatable and efficient. From routing and table saw work to layout, setup and specialty operations, the right jig can simplify a process while improving consistency from one workpiece to the next.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWoodpeckers offers woodworking jigs for a wide range of tools and applications, including router jigs, table saw jigs, setup jigs, positioning aids and specialty fixtures. Each is designed to help control the workpiece, guide the tool or establish a repeatable reference for more predictable results.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhether you're cutting joinery, routing profiles, positioning parts, setting up machinery or repeating the same operation across multiple pieces, explore Woodpeckers woodworking jigs to find solutions built for the way you work.\u003c\/p\u003e","products":[{"product_id":"hole-boring-jig","title":"Hole-Boring Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eWoodpeckers Hole Boring Jig\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWoodpeckers Hole Boring Jig \u003c\/strong\u003eis a 3\/8\" thick solid phenolic, CNC-machined template. Index pins placed against the corner of your table position the template for the first group of holes. Then, you’ll use the already-milled holes to index across the rest of the table surface. All you need is a router that accepts Porter-Cable style guide bushings and a 1\/2\" straight router bit (our variable helix up-cut bits are the best choice).  \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo standards have developed for these table tops\u003c\/strong\u003e. Festool uses 20mm holes while Veritas and a few others use 3\/4\" holes. Woodpeckers has you covered no matter which standard you use because you get the guide bushings and index pins for both hole sizes. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFor less than the price of one replacement top\u003c\/strong\u003e for a Festool MFT, you can get the jig, make your own replacement top and then start adding gridwork tops for the other work surfaces in your shop. With an array of clamps and end-stops there’s no limit to the workholding arrangements you can set up on a gridwork table. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e the Hole Boring Jig is precisely machined and carefully inspected in our Strongsville, Ohio facility just south of Cleveland. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43452540583995,"sku":"HBJ-19","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Hole-Boring-Jig_WEB_Shopify_01b.jpg?v=1783735221"},{"product_id":"variable-router-jig","title":"Variable Router Jig","description":"\u003ch5 style=\"color: #8c1813; margin-bottom: 0.4rem;\"\u003eVariable Router Jig\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThe Variable Router Jig and Router Guide Bushings Are a Perfect Match. \u003c\/strong\u003eYou’ll keep this versatile jig right beside your set of router guide bushings, because every guide bushing operation needs a template, and the VRJ configures in minutes to any square or rectangular shape you want. Rout mortises for joinery. Mortise in hardware like hinges and locks. Rout dadoes for inlay work, adding visually stunning details to your projects. Once you see how easy it is to set up and use, you’ll start inventing ways to use it to make your projects go faster and smoother.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Setup and Easy Reconfiguration.\u003c\/strong\u003e You can assemble the jig in minutes. Calculate the offset from your guide bushing to the edge of your router bit.  Both metric and fractional scales are laser engraved on tracks. Put the scale you prefer on the inside, slide the lockbars into the edges, adjust to dimension, tighten the clamps with the supplied ball tip wrench and you’re ready to rout. When you need to reconfigure for the next step, just loosen the socket head cap screws, slide the tracks to the new dimensions, lock it back up and get back to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHold It Right There!\u003c\/strong\u003e Of course, you have to clamp the jig in place along with the workpiece. In the kit you’ll find four clever hold-down brackets that slip into the edge of the track and allow you to clamp your work securely and quickly. If you’re working on a perforated table like Festool’s MFT, you can clamp your project without anything sticking above the level of the VRJ. The same thing can be done on almost any workbench surface with the proper clamps and a little planning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for a Lifetime of Projects.\u003c\/strong\u003e The tracks for the Variable Router Jig are clear anodized to create a tough, abrasion-resistant surface. The lockbars are a special polycarbonate that slides easily and locks solidly in the track. We offer two complete kits, one with four 18\" tracks and one with two 18\" tracks and two 32\" tracks. Both come with all the lockbars and hold-down brackets you need. If you buy the smaller kit and later need more capacity, we sell the 32\" tracks separately. We also have the hold-down brackets and lockbars available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all of our products,\u003c\/strong\u003e the Variable Router Jigs is precisely machined and carefully inspected in our Strongsville, Ohio manufacturing facility, just south of Cleveland.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"18\" x 18\"","offer_id":43454896013371,"sku":"VRJ-19","price":219.99,"currency_code":"USD","in_stock":true},{"title":"18\" x 32\"","offer_id":43454896046139,"sku":"VRJ-191832","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Variable-Router-Jig_WEB_Shopify_01a.jpg?v=1790791654"},{"product_id":"woodpeckers-universal-cross-dowel-jig-3076","title":"Universal Cross Dowel Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003eWoodpeckers Universal Cross Dowel Jig\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe trick in cross dowel joinery\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e is getting the hole for the cross dowel exactly centered with the bolt hole. That’s where Woodpeckers Universal Cross Dowel Jig comes in. By wrapping around your workpiece, you have stainless steel guide bushings on the end and the side at the same time, and they’re on exactly the same centerline. The end guide bushing directs your drill bit perfectly straight for the bolt hole and the side guide bushing does the same for the cross-dowel insertion hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot only is cross dowel joinery strong,\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e the joint can be put together and taken apart as many times as you like without ever loosing integrity. You can build an apartment full of furniture that all knocks down to a small stack of boards and a bag full of hardware. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur product development staff worked hard\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e to put the “Universal” into the Universal Cross Dowel Jig. It accommodates all the cross-dowel sizes on the market, from tiny 10-24’s up to the massive 3\/8”-16tpi versions made for workbench leg stretchers. The cross-dowel position can be adjusted from 7\/8” up to 2-7\/8” from the end of the board. The bolt hole can be centered on stock from 3\/4\" up to 1-3\/4\" thick. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe hole for the cross dowel can be stopped,\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e hiding the cross dowel on the outside of the project, or drill a hole all the way through and use the cross dowel as an accent. We manufacture a line of bright-finished stainless steel cross dowels to add some style to your project. As you can tell, the design possibilities are limited only by your imagination. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Universal Cross Dowel Jig comes with guide bushings\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e for clearance of #10, 1\/4\", 5\/16\", and 3\/8\" bolts and guide bushings for 3\/8\", 1\/2\" and 5\/8\" outside diameter cross dowels. Scales for locating the bushings are graduated in both inch and metric measurements. Indicators are laser-cut into the stainless steel locating washers, making it easy to position the jig on your centerline and hit your measurements accurately.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eProtected  by US PATENT No. D878,938.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43459713007675,"sku":"UCDJ","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Universal-Cross-Dowel-Jig_WEB_Shopify_01_ca12f40d-1d9f-4313-a007-5c7f455954b0.jpg?v=1789584438"},{"product_id":"cam-a-line-dowel-guide","title":"Cam-A-Line Dowel Guide","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eButt Joints, T-Joints, Miter Joints and Edge Joints on Any Stock Thickness or Size!\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCam-A-Line uses a sliding cam system \u003c\/strong\u003eto maintain even spacing between 3 drill guide bushings. You can space the bushings as close as 3\/4\" center-to-center or spread them out up to 1-3\/4\" center-to-center. This spacing range lets you have an evenly spaced three-dowel array on a workpiece from 2-1\/4\" wide up to 5-1\/2\" wide. You can go narrower than 2-1\/4\" by using only 2 of the guide bushings and you can go wider than 5-1\/2\" by using groups of pins.   \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe easiest way to use Cam-A-Line\u003c\/strong\u003e utilizes the engraved centerlines. Just clamp your two boards together exactly where you want them. Strike a line across the joint. Align Cam-A-Line's engraved centerline with the marks on each piece and drill your joint. The holes will line up perfectly and create a joint that rivals loose tenon or mortise and tenon joints for strength and durability. You can use the same process for miter joints, too.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen you have stacks of similar joints\u003c\/strong\u003e to make, the stop system speeds things up, compared to using a centerline. Once your stop is set, it provides a quick physical reference to locate your work, eliminating aligning the jig to a pencil mark. You can quickly re-index the stop on the other end of the jig to drill the mirror image on your joining piece. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUsing dowels in edge-glued panels \u003c\/strong\u003ecan save hours of hand planing and sanding. The dowels keep the top surface of your panel flat, even when the sections have a little bit of twist or bow. The extension rods for the stop system let you set the spacing between dowel pins wherever you want it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e the Cam-A-Line Dowel Guide is precisely machined and carefully inspected right here in our Strongsville, Ohio, facility just south of Cleveland. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43459760816187,"sku":"CAL-DEL","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Cam-A-Line-Dowel-Guide_WEB_Shopify_01A.jpg?v=1787918298"},{"product_id":"handle-jig-plus","title":"Handle Jig Plus","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eThis one jig can handle them all. \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIts versatility comes from the two adjustable plates \u003c\/strong\u003e\u003cspan\u003ewhich slide along a central beam. We machine the plates from highly durable phenolic that won't warp, bend, or crack due to the elements. Flip it over and you'll find sections of slotted aluminum track that serve three purposes. The tracks hold the adjustable plates perfectly square to the beam. They allow you to use convenient track clamps to clamp your workpiece from the front or the sides, keeping the clamps out of the way. And, the stainless-steel stops slide along the track so you can quickly index the edge of your board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe engrave both inch and metric scales\u003c\/strong\u003e\u003cspan\u003e on the beam to set your handle's width. We also include inch and metric tracks on the underside of the jig to set the length of your handle. Adjusting the router template to your design's dimensions is simple with just a few knobs. You can set the opening to any width up to 7\" (180 mm) and any length up to 5\" (130 mm). Finally, you can start routing waste trays in your cutting board designs. With the Handle Jig Plus, you can use any router with a template guide bushing attachment. And while you can use any router bit that fits your design with the Handle Jig Plus, our 1\" and 3\/4\" Deep Reach Bowl Bits clear out waste quickly while leaving glassy smooth finishes on the bottom and sides.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWith each Handle Jig Plus \u003c\/strong\u003e\u003cspan\u003ewe include a convenient wall-mountable Rack-It, keeping your tool right in plain sight and ready for your next project.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you make a lot of cutting boards and serving trays,\u003c\/strong\u003e\u003cspan\u003e the Handle Jig Plus is just one of many products we make to help you achieve your best work. Our \u003c\/span\u003e\u003ca href=\"https:\/\/www.woodpeck.com\/rout-n-plane-bench-top-board-mill.html\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eBench Top Board Mills\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e let you flatten end-grain and over-sized cutting boards. Our Ultra-Shear \u003c\/span\u003e\u003ca href=\"https:\/\/www.woodpeck.com\/ultra-shear-3-flute-deep-reach-bowl-bit.html\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eBowl bits\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.woodpeck.com\/ultra-shear-carbide-head-3-flute-juice-groove-router-bit.html\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eJuice Groove\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e bits add those special details that distinguish your boards. And our \u003c\/span\u003e\u003ca href=\"https:\/\/www.woodpeck.com\/stabilmax-trim-router-base.html\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eStabilMax Trim Router Base\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e attaches to most popular trim routers to deliver additional support when routing juice grooves and handle recesses. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers tools,\u003c\/strong\u003e\u003cspan\u003e each Handle Jig Plus is expertly machined and carefully inspected at our shop in Strongsville, OH (just south of Cleveland).\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43460998332475,"sku":"HJP","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Handle-Jig-Plus_WEB_Shopify_01.jpg?v=1781792998"},{"product_id":"juice-groove-jig","title":"Juice Groove Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eAdd that Extra Touch to Your Cutting Board Creations!\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eJust 4 Ratcheting knobs at the corners \u003c\/strong\u003eenable you to quickly adjust the jig size. Slide the steel rails into place, lock them up and you're set. The rigid, 11-gauge formed steel rails won't deflect like plastic and wood rails can. Your router base plate sits flat and stable on your workpiece…no add-on guide bushing needed…just follow the inside edge of the jig with the base of your router. And, since the router base plate is riding on your material, you won't need an extension for your router bit. While plunge routers work best, they're not required as they are with other juice groove jigs. In fact, as you can see in the photos, you don't need anything bigger or fancier than a palm router to get perfect results.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe 2\" deep rails \u003c\/strong\u003eallow you to cut juice grooves on any board from 3\/4\" to 1-7\/8\" (even thicker boards can be used by adding spacers under the jig). \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEasily customize the appearance\u003c\/strong\u003e of your cutting board by changing the margin from the edge of the board to the juice groove. It's simply a function of the width of the spacers used between the Juice Groove Jig and your board. Smaller spacers move the groove inward, larger spacers move the groove toward the edge of the board. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Juice Groove Jig works great\u003c\/strong\u003e with Ultra-Shear Juice Groove Bits. Save tedious sanding and create a custom look with these bits offered in a variety of widths and profiles. All feature softened shoulders that ease into the groove for better flow and a smoother look. Of course, the Juice Groove Jig also works with any standard core box bit. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e the Juice Groove Jig is precisely machined and carefully inspected right here in our Strongsville, Ohio, facility just south of Cleveland.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003e*Actual board size limits determined by router base size and desired margin.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43461081858107,"sku":"JGJ","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Juice-Groove-Jig_WEB_Shopify_01.jpg?v=1781735249"},{"product_id":"woodpeckers-joinery-sled","title":"Joinery Sled","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eFaster, More Accurate Joinery on Both Your Table Saw and Router Table\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe versatility of the Joinery Sled begins\u003c\/strong\u003e with its base plate. With 5-1\/2\" of adjustment in the base itself, the Joinery Sled fits almost any size table saw or router table. On top of that, the two-piece upper adjustable base has an additional 3-1\/2\" of travel. Leveling feet on the bottom of the adjustable base prevent racking even when your project uses all of the 9\" of extension. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen you get close, the bearing-guided micro-adjuster\u003c\/strong\u003e lets you tweak your settings for perfect fitting joints. The 4 bearings mounted in the base maintain alignment of the adjustable base and allow the lead screw to move the work table a few thousandths at a time with fingertip control.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhile most joinery will need the table locked 90° \u003c\/strong\u003eto the base, we mounted the table to a quadrant that allows you to lock the table at any angle from 44° to 91°. In our shop testing, we found long miter angles…such as 67-1\/2° for a flag display box…to be easier and safer using the Joinery Sled than any other method we've tried. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWe milled 3 track-clamp grooves in the clamping table \u003c\/strong\u003eto give you flexibility in adjusting the fence and clamping your material. The fence mounts on either end of the table and sets at almost any angle. We include a pair of our pivot clamps, but standard track clamps fit perfectly in the grooves and handle thick stock and repetitive work better. We included a sacrificial face for the fence to support your material as the blade or bit exits. You can make replacements from any 1\/2\" material or get them from us.  \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eYour Joinery Sled comes complete \u003c\/strong\u003ewith a pair of pivot clamps and one sacrificial fence. We've also included a wall-mountable Rack-It to keep your Joinery Sled right in plain sight and ready to go to work. Additional pivot clamps, track clamps, and 3-packs of sacrificial fences are available separately.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products, the Joinery Sled \u003c\/strong\u003eis precisely machined and carefully inspected right here in our Strongsville, Ohio, facility just south of Cleveland. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43461229871163,"sku":"JSLED","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Joinery-Sled_WEB_Shopify_01_08a941d3-a2a9-47db-9ac5-9fd035ec56d6.jpg?v=1788463415"},{"product_id":"spline-jig","title":"Spline Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWorks with Both Your Table Saw and Router Table!\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers Spline Jig\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e starts with two sections of our Super Track. The powder-coated steel legs hold the tracks square to each other at two different height settings. The wider setting allows your project to ride just barely above the machine table. It's perfect for projects as narrow as 1\/2\" and up to 16\" wide. When your project exceeds 16\", just move the tracks inward to the alternate position and now you can add splines to your long projects. The jig includes 4 molded flip stops to make it simple to keep your splines aligned. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUHMW glide strips \u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003eline the bottoms and edges of the legs, reducing friction and protecting your machine's table and fence from scratches. Just position your fence to put the kerf where you want it, keep a little pressure against the fence and guide your project through the saw blade. There's no simpler way to add strength and stability to your joinery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo jazz up your spline joints\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e with either wider splines or dovetail splines, move to your router table. Now you can use straight bits to cut spline slots 1\/4\", 3\/8\", 1\/2\" or larger. Install a dovetail bit to give your projects the classic look of dovetails. Cut the matching spline stock in two passes using the same bit. For a bold look, make your splines from stock that contrasts with the box material. Or, be subtle and use the same species…then see how long it takes people to figure out they're not regular dovetails! Slots in the Super Track accept the head of a 1\/4\"-20 hex head bolt. You can use almost any brand or style of hold-down. Our favorite is the Woodpeckers Pivot Clamp, \u003c\/span\u003e\u003cem\u003e\u003cspan style=\"font-weight: 400;\"\u003esold separately.\u003c\/span\u003e\u003c\/em\u003e\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e, the Spline Jig is precisely machined and carefully inspected in our Strongsville, Ohio, facility just south of Cleveland. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cem\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan data-sheets-root=\"1\"\u003eProtected by US PATENT NO. \u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cem\u003e\u003cspan data-sheets-root=\"1\"\u003eD1,054,821.\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43461438373947,"sku":"SPLINE-23","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/spline-jig_23_01.jpg?v=1777402542"},{"product_id":"adjusta-joint-box-joint-sled","title":"Adjusta-Joint Box Joint Sled","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eOver 1,000 Choices on Pin \u0026amp; Socket Patterns!\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe mating pattern is simply a matter of rotating the template 180°\u003c\/strong\u003e and getting right back to work. Adjusta-Joint doesn't require a dado blade. A standard 1\/8\" kerf chisel tooth rip blade will work, or you can pair it with an Ultra-Shear Flat Top Grooving Blade in 1\/8\", 3\/16\" or 1\/4\" kerf for optimum results. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Woodpeckers team engineered Adjusta-Joint\u003c\/strong\u003e to ensure your success. It starts with the adjustable template mentioned above, but every other aspect of the design focuses on repeatable results, as well. Three key features deserve a closer look. \u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eThe patented leaf spring miter bar\u003c\/strong\u003e works with any miter gauge slot that is nominally 3\/8\" thick and 3\/4\" wide. Even if your miter slot was poorly machined to begin with or has worn with thousands of hours of shop time, the leaf springs expand and contract to compensate and keep Adjusta-Joint riding on a true course. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003col start=\"2\"\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eOnce you clamp the wood to the vertical table, it stays clamped. \u003c\/strong\u003eYou're not moving the workpiece by itself with every cut. The entire vertical table…workpiece, clamps, fence and all…move as one, riding on ultra-low friction PTFE (Teflon) bushings and indexing precisely for the next cut. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003col start=\"3\"\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eDial in the fit to perfectly match your blade and your table saw. \u003c\/strong\u003eThe index pin that registers to the template is tapered. By moving the pin in or out, you control the fit of your joint. Ball detents on the pin-adjuster register each .0015\" as you sneak up on the perfect fit. This adjustment deals with run-out in either the blade or the arbor...or both. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBy the numbers: \u003c\/strong\u003eAdjusta-Joint gives you an 8\" fully adjustable template. For wider projects you can flip your board around and go up to 15\". Depending on your saw's power and the blade you're using, you can cut box joints on stock as thick as 2-1\/2\". Pins can be any size between 1\/4\" and 8\" in 1\/8\" increments. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWe're including a wall-mountable Rack-It \u003c\/strong\u003eto keep your Adjusta-Joint right in plain sight, protected and always ready to go back to work. Two Knuckle Clamps are included but you can also use standard track clamps. The sacrificial backer and the fence are identical. They're available in 2-packs or you can mill your own from 3\/4\" MDF. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products, Adjusta-Joint \u003c\/strong\u003eis precisely machined and carefully inspected right here in our Strongsville, Ohio, facility just south of Cleveland. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43466078879803,"sku":"AJAJ","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/adjusta-joint_25_01-a.jpg?v=1777478850"},{"product_id":"shelf-pin-and-drawer-slide-template","title":"Shelf Pin and Drawer Slide Template","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWoodpeckers Shelf Pin and Drawer Slide Template \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLet’s look at making a new face-frame cabinet.\u003c\/strong\u003e\u003cspan\u003e By simply repositioning a pair of spacers you can offset the shelf pins 1-1\/2\", 2\" or 2-1\/2\" from the edge of your material. If your row of holes extends further than the length of the template, just move the template up, slip a couple of indexing pins in completed holes and keep on drilling. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe same 1-1\/2\", 2\" and 2-1\/2\" offsets\u003c\/strong\u003e\u003cspan\u003e can be achieved in installed cabinets, too. The offset spacers for finished cabinets butt up to the inside of your face frame and the back of the cabinet. Everything is mirror imaged, so right, left, top and bottom all line up perfectly, every time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you’re working on frameless Euro-style cabinets,\u003c\/strong\u003e\u003cspan\u003e the 37mm offset from the front and bottom of the cabinet is built into the jig. The 5mm holes on 32mm centers work with hundreds of different shelf pin styles from around the world and are perfect for a combination of shelves and drawers when using 5mm Euro mounting screws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeaking of drawers,\u003c\/strong\u003e\u003cspan\u003e the template can be used to drill holes for ball-bearing extension slides used in frameless cabinets. You can use Euro mounting screws in 5mm holes or use the included guide bushing to drill pilot holes for standard wood screws.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrawer slides that mount to the face frame\u003c\/strong\u003e\u003cspan\u003e are just as easy. Just move the edge guide pins, pop in the drill guide bushing and you’re perfectly positioned on the edge of your frame stock for the front of the drawer slide. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Shelf Pin and Drawer Slide Template\u003c\/strong\u003e\u003cspan\u003e is machined from solid phenolic with a layer of easy-reading white bonded to the top and bottom. Each setting and spacing is clearly marked on the face of the template to keep you on the right track. The set-back spacers and index pins are made from stainless steel and only fit in their appropriate positions. The overall dimensions of the Shelf Pin and Drawer Slide Template are 23\" x 5\" x 3\/8\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Basic Shelf Pin \u0026amp; Drawer Slide Template\u003c\/strong\u003e\u003cspan\u003e includes the template, inside face frame spacers, outside face frame spacers, frameless spacers, 1\/4\" index pins, 5mm index pins, nylon spacer locking screws and a 7\/64\" drill guide bushing. To go along with the jig, we offer self-centering drill bits in 1\/4\" and 5mm, a 3\/8\" Porter-Cable style template guide bushing and solid carbide spiral router bits in 1\/4\" and 5mm.  If different projects have you approaching shelf pins from every different direction, the Deluxe Set adds both self-centering drill bits, both router bits and the template guide bushing to the Basic.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, the Shelf Pin and Drawer Slide Template\u003c\/strong\u003e\u003cspan\u003e is precisely machined and carefully inspected in our Strongsville, Ohio manufacturing facility (just south of Cleveland).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCredit Card Policy.\u003c\/strong\u003e\u003cspan\u003e Please note; if you're paying by credit card, you will not be charged until your order is ready to ship. However, Paypal and other payment services may charge you at the time the order is placed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Standard","offer_id":43485991305275,"sku":"SPT2","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Deluxe","offer_id":43485991338043,"sku":"SPT2-DEL-KIT","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/shelf-pin-drawer-slide-template_01_2.jpg?v=1778103264"},{"product_id":"mortise-base","title":"Mortise Base","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eStabilize your plunge router on narrow stock. \u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIf it has guide rods, we can probably fit it. \u003c\/strong\u003e\u003cspan\u003eWoodpeckers Mortise Base fits just about any plunge router. Big or little, corded or cordless, latest and greatest or a vintage classic. We offer 4 sizes of guide rods, 1\/4\", 5\/16\" (8mm), 3\/8\" and 10mm. If you're not sure of your guide rod dimension, use the chuck end of a drill bit to check the guide rod opening. The cleverly designed fence mounting system adapts to any spacing between the rods and any spacing from the rods to the bottom of the base plate (up to 1\/2\").\u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFace indexing avoids alignment issues. \u003c\/strong\u003e\u003cspan\u003eJust make sure you keep the engraved fence against the exposed face of your material and your joints will align perfectly. If there's a variation in stock thickness, it will be on the hidden side of the assembly. The Mortise Base works equally well for loose tenon joinery or cutting mortises for machine-cut or hand-cut tenons.\u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe guide rods, fence rods and hardware\u003c\/strong\u003e\u003cspan\u003e are all stainless steel. The fences and brackets are milled from aircraft grade aluminum and surface-treated for appearance, corrosion resistance and friction reduction. This is a lifetime tool that can easily be reconfigured for any router you may get in the future.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, \u003c\/strong\u003e\u003cspan\u003ethe Mortise Base\u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003eis precisely machined and carefully inspected in our shop in Strongsville, Ohio (just south of Cleveland). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003e**NOTE: Not compatible with the Festool OF-2200**\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Base + 1\/4 Inch Guide Rods","offer_id":43513632849979,"sku":"MB-14","price":209.99,"currency_code":"USD","in_stock":true},{"title":"Base + 5\/16 Inch Guide Rods","offer_id":43513632882747,"sku":"MB-516","price":209.99,"currency_code":"USD","in_stock":true},{"title":"Base + 3\/8 Inch Guide Rods","offer_id":43513632915515,"sku":"MB-38","price":209.99,"currency_code":"USD","in_stock":true},{"title":"Base + 10MM Guide Rods","offer_id":43513632948283,"sku":"MB-10","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Mortise-Base_WEB_Shopify_01.jpg?v=1781898117"},{"product_id":"corner-jig-for-radius-chamfer-cuts","title":"Corner Jig for Radius \u0026 Chamfer Cuts","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eUse with Hand-Held Router for Large Panels or with Router Table for Small Parts\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWe focused on versatility\u003c\/strong\u003e when we designed the Corner Jig. You can use it on your router table or with a hand-held router. You’ll get the same flawless results either way. Larger projects like table tops are easier when clamped to a bench and routed with a hand-held router. Smaller projects move along faster doing them on the router table. Either way, just guide the template along the bearing of a flush trim bit for a smooth, even radius or chamfer. You’ll machine a perfect corner every time.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe 16 radius templates\u003c\/strong\u003e start at 1\/8\" and run to 1-1\/2\" in eighth-inch increments and from 1-3\/4\" to 2-1\/2\" in quarter-inch increments. The chamfer templates run from 1\/4\" to 1-1\/2\" in quarter inch increments. When you’re deciding the style and size of the softened corner you want, just try them out on the corner of your work until you decide which looks best.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWoodpeckers Corner Jig\u003c\/strong\u003e starts with a hefty base milled from cast and ground aluminum plate…the same top-quality material we use in our router lifts and precision squares. The 22 different templates mount to the base with three stainless steel screws. All the aluminum components are anodized for corrosion protection and to give them our distinctive “Woodpecker Red” appearance. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWoodpeckers Deluxe Corner Jig Set\u003c\/strong\u003e includes the Corner Jig Base, a wall-mountable Rack-It and all 22 corner templates. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWoodpeckers Chamfer Corner Jig Set\u003c\/strong\u003e includes the Corner Jig Base, a wall-mountable Rack-It and all 6 chamfer templates. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong id=\"docs-internal-guid-a08fb3fa-7fff-2789-d747-e778c34936d3\"\u003eLike all Woodpeckers products\u003c\/strong\u003e, the Corner Jig is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland).\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Deluxe Set","offer_id":43514236010555,"sku":"CJ-SET-DL-24","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Chamfer Only Set","offer_id":43514236043323,"sku":"CJ-SET-CH-24","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Corner-Jig_WEB_Shopify_01-b.jpg?v=1781898060"},{"product_id":"exact-width-dado-jig","title":"Exact Width Dado Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAfter a quick trim pass\u003c\/strong\u003e\u003cspan\u003e to match your router to the jig, all you have to do is fit your stock snugly between the edge guides and you’re ready to make a perfect fitting dado. Your router guide bushing follows the jig’s rails while the router bit cuts a dado perfectly matching the thickness of your stock. It’s that simple. No measuring, no test cuts, no scrap. If you’ve ever used a track saw and guide rail, this jig works similarly…except double…the edge guides are on the exact cutting lines of \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eboth\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e sides of the dado.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf your project calls for blind joinery\u003c\/strong\u003e\u003cspan\u003e, built-in stops at each end of the jig limit the travel of your router. All you need to know is the diameter of your router base and how far back from the edge you want to stop the cut. The easy-to-read engraved scale makes it fast and simple to set up.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe precision scale\u003c\/strong\u003e\u003cspan\u003e used to set your stops serves double-duty. It slides out of its track so you can use it to set your router bit. The scale compensates for the thickness of the jig…no math involved, just set the depth of cut you want.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll four corners\u003c\/strong\u003e\u003cspan\u003e have wide, stainless steel clamping pads to secure the jig to your work. One corner is fixed at 90° to keep your dado perpendicular to your workpiece…no separate square needed for setup. The guide rails are machined from the same solid phenolic used in our top-of-the-line router tables. The sacrificial edge guides will last for multiple dado projects and only need to be replaced if you change to a different combination router bit and guide bushing. You can rout dadoes as narrow as 3\/8\" and up to 1-1\/2\" wide. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Exact Width Dado Jig has a maximum capacity\u003c\/strong\u003e of 32-1\/2\". If your case work routinely calls for vertical grooves in cabinet sides (for adjustable shelf track in upper cabinets, for instance) or you do larger furniture projects, the 32-1\/2\" capacity is just the ticket. Even with that maximum capacity, you can close down to cut a dado just 5” long.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThere are replaceable, zero clearance\u003c\/strong\u003e\u003cspan\u003e blocks at each end of the jig to eliminate splintering and tear-out. These blocks are simple to make yourself, or you can order replacements from us. The jig comes with a precision-machined 1\/2\" diameter Porter-Cable style template guide bushing and a matching spacer (you’ll need it to make that first trim cut). If your router doesn’t use the PC style guide bushing, any 1\/2\" guide bushing and 3\/8” router bit combination will work. All hardware, the adjustable stops, the offset scale and offset indicators are made from stainless steel. In short, this is a bulletproof, lifetime tool that will keep your dadoes fitting perfectly for years, no matter what the plywood manufacturers do in the future.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLike all Woodpeckers tools, The Exact Width Dado Jig \u003c\/strong\u003eis precisely machined and carefully inspected in our Strongsville, Ohio manufacturing facility (just south of Cleveland). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cem\u003eProtected by US PATENT NO. \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e\u003cspan data-sheets-root=\"1\"\u003e11,389,988.\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43514305544251,"sku":"EWDJ-32-20","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Exact-Width-Dado-Jig_WEB_Shopify_01.jpg?v=1781900322"},{"product_id":"mortising-jig","title":"Mortising Jig","description":"\u003ch5\u003e\u003cstrong\u003eCutting mortises with your plunge router just got a whole lot easier…\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the Mortising Jig couldn't be easier.\u003c\/strong\u003e\u003cspan\u003e The vertical table has track clamp slots milled both directions making it simple to clamp stop blocks and fences in place as well as clamping the material you're cutting. We've included one fence you can use vertically, horizontally or at any angle. If you do a lot of complicated layouts for things like chair components, you may find you need multiple stops. We offer an optional Hardware Pack with Mini Multi-Knobs, track nuts and two lengths of bolts to build your own stops and fences. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe solid phenolic horizontal table \u003c\/strong\u003e\u003cspan\u003efeatures a tough, low-friction surface for your router to ride on. The two tables are held perpendicular to each other by a heavy-duty steel frame. You need just one template guide bushing (included) to cut any width mortise up to 1\/2\" The laser-engraved scales for the length of the mortise have both inch and metric graduations. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe made it simple to clamp the Mortising Jig \u003c\/strong\u003e\u003cspan\u003eto any work surface. The notches in the flange align with 20mm holes on 96mm centers…like you'll find on the Festool MFT or Woodpeckers Track Clamp Tables. You can also use standard \"F\" clamps on the flanges to hold it to a regular workbench. Or, if you have a permanent home for it, there are holes for screws.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhile you can use any plunging router bit,\u003c\/strong\u003e\u003cspan\u003e Woodpeckers makes solid carbide spiral router bits in a wide range of fractional sizes as well as metric bits that match Festool Domino loose tenons. You can use ready-made Domino tenons or make larger tenons by milling the stock yourself and profiling the edges with Ultra-Shear Half-Round Bits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e\u003cspan\u003e the Mortising Jig is precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland).\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43514585808955,"sku":"MJ-24","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Mortising-Jig_WEB_Shopify_01.jpg?v=1790297309"},{"product_id":"chamfer-radius-quick-jig","title":"Chamfer and Radius Quick Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eWhen We Say “Quick-Jig” We Mean Really Quick\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers Chamfer and Radius Quick Jigs\u003c\/strong\u003e\u003cspan\u003e are so quick and easy to use you don’t even need a clamp or fastener to use them. Just select the corner profile you want, locate the shoulders of the jig onto the workpiece, and use a bearing-piloted flush trim bit to create your perfect corner. Designed for safe use on a router table, you just hold the jig in perfect position with one hand while you advance the workpiece with the other. Gentle curves at the beginning and end of each pattern lead the router bit in and out of the cuts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGet A Perfect Corner Every Time. \u003c\/strong\u003e\u003cspan\u003e With radii from 1\/8” to 1-1\/2” in 1\/8” increments and chamfers from 1\/4\" to 1-1\/2\" in 1\/4\" increments, you can forget searching through your collection of paint cans and jelly jars to find the corner that fits your project. You can easily “eye-ball” the finished look by simply dropping the different jigs in place. Each Quick-Jig is meticulously machined to exacting tolerances from aircraft grade aluminum, anodized for surface protection and laser engraved with each radius clearly marked. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEach jig has two profiles. \u003c\/strong\u003eThere are 6 radius jigs and 3 chamfer jigs. The complete set comes with all radius jigs, all chamfer jigs and Rack-It.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike all Woodpeckers products, the Chamfer and Radius Quick-Jigs are precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland). \u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43516349743163,"sku":"RQJ-DELUXE","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Chamfer-and-Radius-Quick-Jigs_WEB_Shopify_01.jpg?v=1782153553"},{"product_id":"precision-taper-jig","title":"Precision Taper Jig","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eInterlocking Teeth Ensure Perfect Angle Repeatability\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWe've put thought\u003c\/strong\u003e\u003cspan\u003e into safe and efficient operation, too. There’s a sacrificial MDF sled on the bottom and quick-release clamps riding in the extrusion tracks. With quick-release adjustment and a clamping range from 3\" down to just 17\/32\", the clamps are simple to use for all manner of tapered projects.  The clamping handles serve double-duty as convenient gripping points for pushing the jig. And, the MDF sled eliminates any worry about bottom-side tear-out. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor wider stock,\u003c\/strong\u003e\u003cspan\u003e you have two choices. You can make a sacrificial sled the same size as your workpiece or you can remove the sled and use the Precision Taper Jig riding straight on the table like all the rest. It’s your choice. If you need more than the 32\" capacity of the standard Precision Taper Jig, you can expand it to 48\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThere’s never been a taper jig with all these features;\u003c\/strong\u003e\u003cspan\u003e capacity that can extend from 32\" to 48\" in a matter of minutes, quarter-degree angle resolution that’s instantly repeatable, material clamping and zero-clearance support. This is a handsome, well-built tool that you’ll be proud to have in your shop. It’s designed and built to serve generations of woodworkers to come. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e\u003cspan\u003e the Precision Taper Jig is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland). \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003e\u003cspan data-sheets-root=\"1\"\u003eProtected by US PATENT NO. \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan data-sheets-root=\"1\"\u003eD985,638, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan data-sheets-root=\"1\"\u003eD983,636, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan data-sheets-root=\"1\"\u003e12,090,611 \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cspan\u003e\u003cem\u003e\u003cspan data-sheets-root=\"1\"\u003e11,820,039.\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"32 Inch","offer_id":43526135939131,"sku":"PTJ-32","price":219.99,"currency_code":"USD","in_stock":true},{"title":"48 Inch","offer_id":43526135971899,"sku":"PTJ-48","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Precision-Taper-Jig_WEB_Shopify_01.jpg?v=1782141026"},{"product_id":"ellipse-jig","title":"Ellipse Jig","description":"\u003ch4 data-start=\"98\" data-end=\"150\" class=\"PDq2pG_selectionAnchorContainer\"\u003eWoodpeckers Ellipse Jig for Router-Cut Oval Projects\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers NEW Ellipse Jig \u003c\/strong\u003eguides your router along a perfect elliptical path to cut bowls, trays, picture frames, plaques and any other elliptical design you can imagine.   Unlike competitive jigs made from plastic, Woodpeckers Ellipse Jig is laser-cut from steel then zinc plated to prevent corrosion. Mounting holes for most popular mid-size and larger plunge routers have been milled into the jig arm with CNC accuracy (see the full list in the photo carousel). Just mount the sliding track base to the center of your material, Place the jig arm on the base, lock it up and your router is ready to track a perfect ellipse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn ellipse has two determining dimensions…\u003c\/strong\u003ethe major axis and the minor axis. The difference between the two axes determines how \"fat\" or \"skinny\" your ellipse comes out. The Ellipse Jig works with differentials of 2\" to 4\" and major axes from 9\" to 19\" (smallest = 9\" x 7\" and largest = 19\" x 17\"). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMost ellipse projects involve 2 parallel cuts,\u003c\/strong\u003e for instance, bowls, platters and picture frames. Setting up for the second cut can be challenging with most ellipse jigs, but notice the Woodpeckers jig arm is cut with overlapping axis holes rather than a continuous slot. This lets you move the arm in precise 1\/4\" increments for perfectly parallel cuts. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs a bonus, we've included an axis pin.\u003c\/strong\u003e If you need a true circle, rather than an ellipse, just use the axis pin instead of the sliding track base and cut perfect circles with your router…no need for a separate trammel attachment!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, \u003c\/strong\u003ethe Ellipse Jig is precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland). \u003cbr\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43803638399035,"sku":"ELPSJ","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Ellipse-Jig_WEB_01.jpg?v=1788295751"}],"url":"https:\/\/woodpeck.com\/collections\/woodworking-jigs.oembed","provider":"Woodpeckers","version":"1.0","type":"link"}