{"title":"Miter Sleds","description":"\u003cp\u003eShop miter sleds designed for stable crosscuts, improved workpiece support, and consistent results. This collection includes sled systems that increase control, reduce movement, and enhance accuracy on table saws.\u003c\/p\u003e","products":[{"product_id":"woodpeckers-in-dexable-miter-sled-drop-zone","title":"in-DEXABLE Miter Sled w\/ Drop Zone","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eCheck Out These Exclusive Features!\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGraduated fence with extension\u003c\/strong\u003e. The heavily-ribbed extruded fence carries the stop out to 18\" when closed or up to 31\" when fully extended. When you need the fence extended, you still have a built-in scale. Just lock the stop on the \"EXT\" mark and set your dimension on the extension bar.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAll New Micro-Adjustable Flip Stop\u003c\/strong\u003e Re-designed from the inside out, this new flip-stop is rock-solid when locked. The adjustment is smooth and fluid with minimal backlash. A spur fits back into the fence so mitered ends can't lift the stop. This stop is fully compatible with the Exact-90 Miter Gauge, too.  \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe foundation of any miter gauge or sled\u003c\/strong\u003e is the bar that fits the slot in your table saw, and Woodpeckers patented leaf-spring miter bar can't be matched. The nylon leaf springs in the edge of the bar automatically adjust to compensate for slots that are poorly machined or worn from thousands of hours of repetitive use. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe sled attaches to the miter bar \u003c\/strong\u003ewith 3 socket-head cap screws riding in milled slots. The slots give the sled an adjustment range that covers just about every table saw ever made. Best of all, the adjustments are all made from above. You can tweak the sled into perfect alignment with your saw blade and lock it securely without ever removing it from the table saw.  We machine the sled from 1\/2\" Baltic Birch plywood that has a black micro-dot laminate on both sides. It's flat, stable and low-friction. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBy the numbers.\u003c\/strong\u003e The table of the in-DEXABLE Miter Sled measures 15\" x 15\". The miter bar is 3\/8\" x 3\/4\" x 18-1\/2\". With most 10\" table saws you'll have 22\" of cross-cut capacity. The positive stops on the miter head are for 3, 4, 5, 6, 8, and 12 sided objects (60°, 45°, 36°, 30°, 22-1\/2° and 15°). The Drop Zone cut-off catch table measures 8\" x 15\". One sacrificial end-block is included. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e the in-DEXABLE Miter Sled is precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland). \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43466091561019,"sku":"IMS-I","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/in-dexable-miter-sled_26_01-a.jpg?v=1777480191"},{"product_id":"in-dexable-miter-gauge-sled-drop-zone-upgrades","title":"in-DEXABLE Miter Gauge - Sled \u0026 Drop Zone Upgrades","description":"\u003cp data-start=\"882\" data-end=\"1286\"\u003e\u003cstrong\u003eWoodpeckers Sled Upgrade Kit and Sled Drop Zone are designed\u003c\/strong\u003e to enhance the functionality of the Indexable Miter Gauge by transforming it into a more capable miter sled setup. These accessories are made specifically for the Woodpeckers in-DEXABLE Miter Gauge system and are intended to improve workpiece control, support, and overall sled-style operation during crosscutting and angled cuts.\u003c\/p\u003e\n\u003cp data-start=\"1288\" data-end=\"1739\"\u003e\u003cstrong\u003eThe Sled Upgrade Kit \u003c\/strong\u003eadds the necessary components to create a larger support platform around the miter gauge, helping stabilize wider panels and longer stock during cutting operations.\u003c\/p\u003e\n\u003cp data-start=\"1288\" data-end=\"1739\"\u003e\u003cstrong\u003eThe Sled Drop Zone\u003c\/strong\u003e further expands the usable support area by providing additional backing and material support where the workpiece exits the cut. Together, these accessories help improve handling consistency while reducing unsupported material movement during use.\u003c\/p\u003e\n\u003cp data-start=\"1741\" data-end=\"2046\"\u003eBoth accessories are purpose-built upgrades for the Woodpeckers in-DEXABLE Miter Gauge and are not standalone cutting systems. They are intended for woodworkers looking to expand the original gauge into a more complete sled-style setup while maintaining the indexed angle functionality.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Sled Upgrade","offer_id":43518936285243,"sku":"SSCMS-UP","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Drop Zone Upgrade","offer_id":43518936318011,"sku":"SSCMS-DZ","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/sscms-upgrade-main.png?v=1779054161"},{"product_id":"in-dexable-miter-gauge-sled-replacement-parts-accessories","title":"in-DEXABLE Miter Gauge \u0026 Sled - Replacement Parts \u0026 Accessories","description":"\u003cp\u003eWoodpeckers in-DEXABLE Miter Gauge \u0026amp; Sled items: the in-DEXABLE Miter Gauge Flip Stop, the in-DEXABLE Miter Gauge Zero Clearance Block 3 Pack, and the Flop Stop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe replacement flip stop \u003c\/strong\u003eis the same tool-free, micro-adjustable stop used with the gauge fence. The stop locks firmly, adjusts smoothly, and includes a spur that fits back into the fence so mitered ends cannot lift the stop. It is also compatible with the Exact-90 Miter Gauge fence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe zero clearance blocks \u003c\/strong\u003eare sold as a 3 pack for the in-DEXABLE Miter Gauge \u0026amp; Sled and replace the sacrificial block at the fence end, which helps eliminate tear-out and direct off-cuts away from the blade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Flop Stop\u003c\/strong\u003e uses an adjustable pin resting on the material to keep the miter fence from twisting left when the gauge is pulled back off the table. It is also compatible with the Exact-90 Miter Gauge fence.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"in-DEXABLE Miter Gauge \u0026 Sled Flip Stop","offer_id":43518941790267,"sku":"IMG-FS","price":39.99,"currency_code":"USD","in_stock":true},{"title":"in-DEXABLE Miter Gauge \u0026 Sled Clearance Blocks (3 Pack)","offer_id":43518941823035,"sku":"IMG-ZCX3","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Flop Stop","offer_id":43518941855803,"sku":"FLOPSTOP","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/in-DEXABLE-Miter-Gauge_Replacement-Parts_Accessories_01.jpg?v=1783024420"},{"product_id":"stealthstop-miter-sled","title":"StealthStop Miter Sled","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eAccurate Angles and Perfect Length Control\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLet’s take a closer look at the features,\u003c\/strong\u003e\u003cspan\u003e starting with the sled adjustment. The sled attaches to the miter bar with 3 socket-head cap screws riding in milled slots. The slots give the sled the range needed to fit almost any table saw. Best of all, the adjustments are all made from above. You can tweak the sled into perfect alignment with your saw blade and lock it securely without ever removing it from the table saw.  We machine the sled from 1\/2\" Baltic Birch plywood that has a black micro-dot laminate on both sides. It's flat, stable and low-friction. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The miter bar has 4 leaf springs \u003c\/strong\u003e\u003cspan\u003ealong the edge. The springs automatically adjust for miter slots that have worn over time or were poorly sized to begin with. They'll even average out slots that vary in dimension and help you get good results from a \"less than perfect\" saw.  If your saw has a T-shaped miter slot, a pair of oblong spacers fit the T-slot and keep your bar in place when fully extended. Don't worry if you don't have a T-slot…the spacers come off in seconds to fit normal 3\/8\" x 3\/4\" slots. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen you talk about the flip stops, the name says it all. \u003c\/strong\u003e\u003cspan\u003eStealthStops retract completely within the fence when they're not needed, then flip out instantly when they are. They're always ready, but never in the way. The micro-adjuster has a generous range of motion with minimal backlash. By flipping out sideways (instead of down from above) you never worry about mitered ends lifting a stop out of position. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe normal setting\u003c\/strong\u003e\u003cspan\u003e of the back fence gives you 21\" of support. If you need to use your stop beyond that, just slide the extension out to a maximum of 29\". Additional stops can be added to your StealthStop Miter Sled anytime you need them. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe protractor and its positive stops \u003c\/strong\u003e\u003cspan\u003erepresent the spirit of Woodpeckers engineering. A typical \"pin in a hole\" index requires clearance tolerances to avoid binding. Even held to very strict tolerance there's \"wiggle room\". To eliminate that, the StealthStop miter gauge head uses a tapered index pin. The tapered pin engaging the hole ensures perfect centering without risk of binding…and no wiggle room, even after thousands of cycles. Calibration of the protractor is dead simple and once calibrated for square cuts, all the angle stops are spot-on, too. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBy the numbers.\u003c\/strong\u003e\u003cspan\u003e The table of the StealthStop Compact Miter Sled measures 15\" x 15\". The miter bar is 3\/8\" x 3\/4\" x 18-1\/2\". With most 10\" table saws you'll have 22\" of cross-cut capacity. The positive stops on the miter head are for 3, 4, 5, 6, 8, and 12 sided objects (60°, 45°, 36°, 30°, 22-1\/2° and 15°). The optional Drop Zone cut-off catch table measures 8\" x 15\". One sacrificial end-block is included and we offer them in 3-packs. If you have a StealthStop Miter Gauge and would like to convert it to a StealthStop Miter Sled, there's a conversion kit with all the parts and hardware you need. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products,\u003c\/strong\u003e\u003cspan\u003e the StealthStop Miter Sled is precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland). \u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Miter Sled Only","offer_id":43518953390139,"sku":"SSCMS","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Drop Zone Only","offer_id":43518953422907,"sku":"SSCMS-DZ","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Sled \u0026 Drop Zone Bundle","offer_id":43518953455675,"sku":"SSCMS-DLX","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/stealthstop-miter-sled_23_01.jpg?v=1779056180"},{"product_id":"autoscale-miter-sled","title":"AutoScale Miter Sled","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eAutoScale™\u003c\/strong\u003e \u003cstrong style=\"font-size: 0.875rem;\"\u003eMiter Sled\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLet’s take a closer look at some of the features \u003c\/strong\u003e\u003cstrong\u003e,\u003c\/strong\u003e\u003cspan\u003e starting with the fence pivot. On all other miter sleds, once you adjust away from 90°, the scale (if it has one) is no longer correct. The end-point moves and you’re no longer calibrated to your saw blade. But the pivot on the AutoScale adjusts automatically as you change the angle, keeping the scale perfectly calibrated throughout the entire adjustment range…18\" at 0° is still 18\" at 60°. Imagine confidently knowing the laser-engraved scale on the fence is as accurate as any scale in your shop. It’s a real time saver. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe use our CNC mills\u003c\/strong\u003e\u003cspan\u003e to perfectly locate stops for common miter angles. Just depress the pin while moving the fence into position and you’ll lock in at the perfect angle. No test cuts, no gaps, just perfect miters. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo complement the dialed-in accuracy\u003c\/strong\u003e\u003cspan\u003e of the protractor, the micro-adjustable flip-stop has a section that nests back into the face of the fence. This prevents sharp mitered ends from lifting the stop out of position. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhile miter cuts are crucial, \u003c\/strong\u003e\u003cspan\u003emost woodworkers first consider a miter sled because they need a better way to handle wide cross-cuts. To make sure the AutoScale delivers flawless wide panel cuts we put two T-slot washers on the front end of the runner, not just one. This helps keep the sled aligned when you’re using the full 24\" cross-cut capacity. If your saw doesn’t have a T-slot, the washers come off in seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe miter bar has a series of\u003c\/strong\u003e \u003cstrong\u003e5 leaf springs \u003c\/strong\u003e\u003cspan\u003ealong the edge that keep it snug in any miter slot, whether it is perfectly sized, poorly machined or old and worn. If the slot is inconsistent, the springs expand or compress to keep the bar aligned and the feed resistance uniform…no tight spots or wiggly areas. If your saw has a T-track miter slot, the miter bar has two T-washers, not just one, giving you extra support when making wide cross-cuts.  No T-track?  No problem.  The T-washers come off with simple counter-sunk screws.  Bottom line?  If your miter slot is anywhere close to 3\/8\" x 3\/4\" the miter bar will fit.  The leaf spring feature easily accommodates miter slots from  .742\" to .765\" wide.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe also added a shelf \u003c\/strong\u003e\u003cspan\u003eat the end of the fence extension so long boards are fully supported throughout the cut. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe optional Drop Zone table \u003c\/strong\u003e\u003cspan\u003efits beside your AutoScale to catch your offcuts. The nylon locating bars expand so you can lock the Drop Zone in place on your table saw. If you need multiples of very short pieces, pop up one of the StealthStops just ahead of the blade and you can register against the stop and safely cut pieces just fractions of an inch long. The Drop Zone is symmetrical to work on either side of the blade. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou can get either a right or left AutoScale \u003c\/strong\u003e\u003cspan\u003eand add the Drop Zone or build your own catch table. Or, get the bundle with both AutoScales and a Drop Zone and save some money over individual prices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ's\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWhat is the size of the main table?\u003c\/em\u003e\u003cbr\u003e\u003c\/strong\u003eThe main table is 23-½ inches long x 18-½ inches wide \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWhat is the size of the Drop Zone Table?\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003eThe Drop Zone table is 23-½ inches long and about 13 inches wide. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWhat is the travel distance of the Stealth Stop in the Drop Zone Table?\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003eThe stealth stop can be set anywhere from ¾” to 7-1\/2”.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWhat is the maximum capacity? \u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003eThe maximum capacity without the optional extension is 50 inches.  This can be increased to 68 inches with the optional extension bar that replaces the original bar. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Inch - Deluxe","offer_id":43523295346747,"sku":"ASMS-DEL","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Inch - Left Side Only","offer_id":43523295412283,"sku":"ASMS-L","price":519.99,"currency_code":"USD","in_stock":true},{"title":"Inch - Right Side Only","offer_id":43523295477819,"sku":"ASMS-R","price":519.99,"currency_code":"USD","in_stock":true},{"title":"Inch - Drop Zone Only","offer_id":43523295543355,"sku":"ASMS-D","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Metric - Deluxe","offer_id":43523295379515,"sku":"ASMS-DEL-M","price":1089.99,"currency_code":"USD","in_stock":true},{"title":"Metric - Left Side Only","offer_id":43523295445051,"sku":"ASMS-L-M","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Metric - Right Side Only","offer_id":43523295510587,"sku":"ASMS-R-M","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Metric - Drop Zone Only","offer_id":43523295576123,"sku":"ASMS-D-M","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/autoscale_miter-sled_01-d.jpg?v=1779122445"}],"url":"https:\/\/woodpeck.com\/collections\/miter-sleds.oembed","provider":"Woodpeckers","version":"1.0","type":"link"}