{"title":"Measuring Gauges","description":"\u003cp\u003eExplore measuring gauges designed to support accurate layout, transfer, and setup across a wide range of woodworking tasks. This collection includes bar gauges, centering gauges, bevel gauges, and stair tread and shelf gauges, each built to simplify measuring and improve consistency. Whether you’re transferring dimensions, finding center points, setting angles, or fitting components, these gauges help streamline workflows and deliver repeatable, precise results in the shop.\u003c\/p\u003e","products":[{"product_id":"modular-bar-gauge","title":"Modular Bar Gauge System","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eMeasure Accurately Without Inches or Millimeters!\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe Modular Bar Gauge System\u003c\/strong\u003e\u003cspan\u003e starts with two precision machined blocks, two stainless rods that slide through the blocks and two clamping knobs to lock it all up once both ends are touching the walls of your assembly.  To add versatility, we designed four different tips for the ends of the bars, including the “Mushroom” Tips which convert an ideal inside measurement tool to one that works just as well for outside dimensions. We also wanted you to be able to use the Modular Bar Gauge System for even your largest projects, so we threaded the ends of bar sections, allowing you to use as many or as few as you need for the job at hand, from as little as 8-1\/4\" all the way up to 96-5\/8\". Let’s take a closer look, starting with the different tip options. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Blunt-End Tips\u003c\/strong\u003e\u003cspan\u003e gauge the distance between two parallel surfaces…the sides of a cabinet for instance. They’re perfect for determining the length of shelves or the width of door and drawer openings. When making built-ins, they are indispensable when taking measurements between walls. Use them anywhere you need an exact physical replication of the distance between two flat planes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pin Tips\u003c\/strong\u003e\u003cspan\u003e reach down inside the bottom of dadoes and grooves. Don’t rely on math to figure out how big to cut your drawer bottoms…use the Pin Tips to measure the groove-to-groove distance precisely. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNow comes the clever part…\u003c\/strong\u003e\u003cspan\u003eonce you have the dimension you need, using either the Blunt-End Tips or the Pin Tips, don’t measure the bar gauge (although, you could if you wanted to), just take it to your table saw or miter saw and use this exact physical reference to do your set up. No math, no tiny graduations, just perfect fits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Arrow-Shaped Tips\u003c\/strong\u003e\u003cspan\u003e have 60° points allowing them to reach into inside corners. The surest way to check an assembly for square is to measure the diagonals and confirm that they’re equal. The Modular Bar Gauge with the Arrow-Shaped Tips makes this a simple check, compared to trying to eyeball a square-ended measuring device shoved into the corner. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNow comes the cleverER part…the Mushroom Tips\u003c\/strong\u003e\u003cspan\u003e. Once you start measuring with a physical reference instead of reading a scale, you’ll start looking for other ways to use the idea. The Mushroom Tips expand the bar gauge to handle outside measurements as well as it does inside measurements. Once you’ve adjusted the Mushroom Tips to an outside dimension, replace them with the Blunt-End Tips and transfer your measurement. In other words, the inside of the Mushroom Tip is exactly the same distance from the end of the stainless bar as the “business-end” of the Blunt Tip. By simply switching tips, you can now transfer that perfect outside dimension to your table or miter saw. (Note: If you already own our bar gauge, Mushroom Tips can be ordered separately.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Trammel Head Set (included in Deluxe sets)\u003c\/strong\u003e\u003cspan\u003e draws large arcs. It consists of (2) Trammel Heads that can be locked anywhere along the rod’s length. Each Trammel Head can hold a pencil or a carbide-tipped scribe. Use the scribe as a pivot or to strike a physical groove along your arc. Two scribes and two pencils are included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Modular Bar Gauge System\u003c\/strong\u003e\u003cspan\u003e comes in two different set configurations. One with and one without the Trammel Head Set accessory. Each set includes all (8) Tips, (2) End Bars, (6) 12\" Long Extension Bars, (2) 6\" Long Extension Bars and (2) Clamp Bodies with knurled knobs. You can get either set in a molded, American-made, protective case or in a stackable Systainer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, \u003c\/strong\u003e\u003cspan\u003ethe Modular Bar Gauge System is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland).\u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003eThis former OneTIME Tool has now joined our permanent product lineup. \u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Standard System - WP Case","offer_id":43529872441403,"sku":"MBG-WP-24","price":219.99,"currency_code":"USD","in_stock":true},{"title":"Deluxe System - WP Case","offer_id":43529872474171,"sku":"MBGTS-WP-24","price":279.99,"currency_code":"USD","in_stock":true},{"title":"Deluxe System - Systainer Case","offer_id":43529872506939,"sku":"MBGTS-SYS-24","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/modular-bar-gauge_24-01.jpg?v=1779232769"},{"product_id":"modular-bar-gauge-parts-accessories","title":"Modular Bar Gauge System - Parts \u0026 Accessories","description":"\u003cp\u003eThis parts and accessories page is for expanding, maintaining, or reconfiguring a Woodpeckers Modular Bar Gauge System without purchasing a complete set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Trammel Head Set \u003c\/strong\u003eincludes two trammel heads that lock anywhere along the rod length. Each head can hold a pencil or carbide-tipped scribe for drawing large arcs, using the scribe as a pivot, or striking a physical groove along an arc. Two scribes and two pencils are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBar Gauge Bodies \u003c\/strong\u003eare sold as a pair and provide replacement clamp bodies for the bar gauge assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMushroom Bar Gauge Tips\u003c\/strong\u003e are sold as a pair and convert the bar gauge for outside measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Replacement Scribe Tip\u003c\/strong\u003e is made for the Trammel Head Set. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Trammel Head Set","offer_id":43529894559803,"sku":"TRMHD-SET-24","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Mushroom Bar Gauge Tips","offer_id":43529894592571,"sku":"BGTIPS-MR-24","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Bar Gauge Bodies","offer_id":43529894625339,"sku":"BGBODIES-24","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Replacement Scribe Tip","offer_id":43529894658107,"sku":"SCRIBE-TIP-24","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Modular-Bar-Gauge-Parts-Accessories_WEB_Shopify_01a.jpg?v=1782232400"},{"product_id":"sliding-bevel-gauge","title":"Sliding Bevel Gauge","description":"\u003ch4 data-start=\"0\" data-end=\"51\"\u003eEasy to Use and Adds Some \"Flash\" to your Workbench\u003c\/h4\u003e\n\u003cp data-start=\"53\" data-end=\"352\"\u003e\u003cstrong\u003eThat clever mechanism inside\u003c\/strong\u003e requires an insert panel, which gave our product designer an opportunity to have some fun. He jeweled the stainless steel inserts with engine-turning, creating a nostalgic look that brings to mind classic car dashboards and Charles Lindbergh's Spirit of St. Louis. \u003c\/p\u003e\n\u003cp data-start=\"354\" data-end=\"677\"\u003e\u003cstrong\u003eWe make two sizes\u003c\/strong\u003e with the same fundamental design. The smaller 4\" model is ideal for dovetails and smaller projects. The 7\" model handles larger furniture projects. Both feature satin-finish stainless steel blades, all stainless steel hardware, jeweled stainless steel inserts and a \"Woodpecker's Red\" aluminum body. \u003c\/p\u003e\n\u003cp data-start=\"679\" data-end=\"1093\"\u003e\u003cstrong\u003eWoodpeckers Bevel Block complements \u003c\/strong\u003ethe Sliding Bevel Gauges perfectly, whether you use them as a T-Bevel Gauge, Angle Finder or Angle Divider in your layout work. It gives you a physical reference for the 5 most common miter angles and the 3 most common dovetail angles. By referencing different sides of the Bevel Block, you have the primary angle, its complement (90° - angle) and its supplement (180° - angle).\u003c\/p\u003e\n\u003cp data-start=\"1095\" data-end=\"1410\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong\u003eThe two Sliding Bevel Gauges and the Bevel Block\u003c\/strong\u003e are all available individually, or you can save by getting the complete set. Like all Woodpeckers products, the Sliding Bevel Gauges and the Bevel Block are precisely machined and carefully inspected in our Strongsville, Ohio, facility just south of Cleveland. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"4 Inch","offer_id":43530917969979,"sku":"SBG-4-23","price":129.99,"currency_code":"USD","in_stock":true},{"title":"7 Inch","offer_id":43530918002747,"sku":"SBG-7-23","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Deluxe Set","offer_id":43530918035515,"sku":"SBG-DEL-23","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/sliding-bevel-gauge_block_23_01-a.jpg?v=1779289312"},{"product_id":"sliding-bevel-gauge-bevel-block","title":"Sliding Bevel Gauge - Bevel Block Only","description":"\u003cp data-start=\"768\" data-end=\"1205\"\u003eThe Woodpeckers Bevel Block is designed as a physical reference accessory for quickly setting and checking common woodworking angles. It complements Woodpeckers Sliding Bevel Gauges by giving users a direct reference for the 5 most common miter angles and the 3 most common dovetail angles. By referencing different sides of the Bevel Block, you can use the primary angle, its complement, and its supplement without relying on guesswork.\u003c\/p\u003e\n\u003cp data-start=\"1207\" data-end=\"1633\"\u003eThis makes the block useful when setting a bevel gauge for layout work, miter setups, dovetails, and angle transfer tasks where a repeatable physical reference is preferred. The Bevel Block is sold individually under SKU BVLBLK-23 and is also available as part of the complete Sliding Bevel Gauge and Bevel Block set. Like the related Sliding Bevel Gauges, it is made and inspected at Woodpeckers’ Strongsville, Ohio facility.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43530925703227,"sku":"BVLBLK-23","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/bvblk-23-main-no-text.jpg?v=1779290627"},{"product_id":"mt-center-gauge","title":"MT Center Gauge","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eKeep yourself CENTERED\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe MT Center Gauge eliminates\u003c\/strong\u003e\u003cspan\u003e the guesswork from precisely centering mortise and tenon joints. The precision-machined parallel arms quickly adjust to the stock thickness, placing the marking bar right in the middle. Just scribe each side of the bar and you’re done. Each marking bar is precision-machined from stainless steel (ideal for working with marking knives), and each has a pencil guide at its exact center. The parallel arms open to accommodate stock up to 2\" thick.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose from four\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emortise and tenon widths\u003c\/strong\u003e\u003cspan\u003e (five for the metric system). Changing the width of your mortise and tenon layout couldn’t be easier. Simply remove the two thumb screws holding the marking bar in place and switch to the width you want. The imperial set comes with 1\/4\", 3\/8\", 7\/16\", and 1\/2\" marking bars. Or, if you’re like most woodworkers these days and work in both inch and metric depending on the project, the Deluxe Kit includes all nine marking bars. These are all the sizes you need for stock from 1\/2\" to a full 1-1\/2\" thick and more. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MT Center Gauge has been a popular OneTIME Tool\u003c\/strong\u003e\u003cspan\u003e over its handful of releases. Now, we decided to make it part of our permanent lineup. Like all of our tools, the MT Center Gauge is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland).\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Inch Only Set","offer_id":43530940022843,"sku":"MTCGSS-IN-24","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Deluxe Set (Inch \u0026 Metric)","offer_id":43530940055611,"sku":"MTCGSS-DEL-24","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/mt-center-gauge_24_01.jpg?v=1779291450"},{"product_id":"stair-tread-template-tool","title":"Stair Tread Template Tool","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eNot a Box of Parts! Fully Self-Contained. \u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIt starts with 14-gauge cold rolled steel,\u003c\/strong\u003e laser-cut and computer-formed. All pieces are either zinc plated or powder-coated so you'll never worry about rust. The clever design of the extension arms gives you a range of template sizes from 20-1\/4\" to 52\" The ratcheting knob at the bevel arm joint will give you the leverage you need for a secure grip but won't interfere with your walls.  \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUsing the tool couldn't be easier\u003c\/strong\u003e. Just extend the arms and align the bevel gauges to the walls. Lock the angles and the extension arms and you have a perfect template for your shelf or stair component without ever touching a tape measure or angle finder. Now align the template to your material, mark and cut. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen the project calls for expensive material,\u003c\/strong\u003e like this 1-1\/2\" thick quartersawn white oak, you want a template tool that will hold its settings and get the transfer done accurately. It's even better when the right tool for the job is made here in America and priced competitively with plastic versions from overseas. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen the job is done\u003c\/strong\u003e the Stair Tread Template Tool folds up in seconds with no loose parts to track down or worry about. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLike all Woodpeckers products\u003c\/strong\u003e, the Stair Tread Template Tool is precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland). \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43530958438459,"sku":"STTT","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/Stair-Tread-Template_SHOPIFY_01b.jpg?v=1779910883"},{"product_id":"stair-tread-shelf-gauge","title":"Stair Tread \u0026 Shelf Gauge","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eCreate a Perfect Template to Match Out-of-Square Walls\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe Stair Tread and Shelf Gauge \u003c\/strong\u003e\u003cspan\u003estarts with the two adjustable bevel ends. They swing in or out to match the angle of the adjacent wall. The versatility of this new tool comes from how the ends join the beam. By using our familiar Dual-Purpose Track and our proven track connectors, you can add beam sections as needed. You can use the same tool to make templates for shelves up to 64\" or as short as 17\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne end has a sliding connector \u003c\/strong\u003e\u003cspan\u003e(you can put it on whichever end you prefer). This lets you adjust the length of the gauge right into the opening for the shelf or stair tread. Slide the beam out until both ends are against the walls, adjust the two ends to match the wall angle, lock it up and you have your perfect instant template.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis tool really shines\u003c\/strong\u003e\u003cspan\u003e on the next step…transferring the template to your stock. While other commercial jigs and all the homemade designs expect you to align the jig to the edge of your stock by feel, our Stair Tread \u0026amp; Shelf Gauge has two stops that flip over to give you a perfect reference for the edge. Now, simply mark your ends and make your cuts. The shelf, tread or riser will drop right in perfectly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe adjustable bevels\u003c\/strong\u003e\u003cspan\u003e at the ends of the Stair Tread \u0026amp; Shelf Gauge are machined from aircraft-grade aluminum on our CNC milling centers. Then clear anodized for protection and to reduce friction. The extruded beam sections are also anodized, but in our familiar “Woodpeckers Red” color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Stair Tread \u0026amp; Shelf Gauge comes complete \u003c\/strong\u003e\u003cspan\u003ewith (4) 12\" sections of beam, (1) 6\" section of beam, two adjustable bevel ends, two edge flip-stops and all the necessary connecting bars and knobs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers Stair Tread \u0026amp; Shelf Gauge\u003c\/strong\u003e\u003cspan\u003e is precisely machined and carefully inspected in our Strongsville, Ohio factory.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eProtected by US PATENT NO. \u003c\/em\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e\u003cspan data-sheets-root=\"1\"\u003eD1,008,828.\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"With Systainer","offer_id":43530977542203,"sku":"STSG-SYS-24","price":289.99,"currency_code":"USD","in_stock":true},{"title":"No Systainer","offer_id":43530977574971,"sku":"STSG-24","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/stair-tread-shelf-gauge_24_01-a.jpg?v=1779293234"},{"product_id":"6-in-1-shop-pocket-gauges","title":"6-in-1 Shop \u0026 Pocket Gauges","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers 6-IN-1 Gauges\u003c\/strong\u003e\u003cspan\u003e give you a physical reference for measurements to eliminate the errors that can crop up when reading scales. With a series of shoulders, pins and stops, you have several different ways to physically reference a set dimension. This handy device comes in two different sizes. For pocket-sized convenience, there’s the 6-in-1 Pocket Gauge and for increased capacity there’s the 6-in-1 Shop Gauge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt the heart of a 6-IN-1 Gauge\u003c\/strong\u003e\u003cspan\u003e is a pair of stainless steel gear racks. When you adjust the tool, the gear teeth engage, locking the two halves together at perfect 1 \/32\" (or 1mm) steps…get it close and the rack will do the rest. For instance, if you need to set a dado blade for a 15\/32\" depth of cut, just move the sliding block up until you’re just short of a half inch. Lock the knob and you’ll see that the gears mesh perfectly at 15\/32\" as the knob tightens.  If you prefer to work in metric measurements, just take the gear racks off, flip them over and now the rack will lock at perfect 1mm intervals. It’s great if you work in metric all the time…it’s even better if you don’t! Don’t spend time trying to work conversions when fitting something metric, just flip your racks, make your setting and move on.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003e Saw Blade \u0026amp; Router Bit Depth of Cut.\u003c\/strong\u003e\u003cspan\u003e With the feet on your table surface, the sliding block gives you a physical reference to set your saw blade or router bit. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Drill Bit Stop Collars\u003c\/strong\u003e\u003cspan\u003e. Turn the tool over and you’ll see a vee-block. Use that to cradle your drill bits while you set a stop collar. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Marking Gauge.\u003c\/strong\u003e\u003cspan\u003e Move the sliding block past the feet and you have a marking gauge. There’s a notch to keep your pencil properly positioned.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Depth Gauge.\u003c\/strong\u003e\u003cspan\u003e Need to check a rabbet to make sure it’s deep enough? Use the flat end of the sliding block to measure from the feet down to the bottom of the rabbet. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Centering Gauge.\u003c\/strong\u003e\u003cspan\u003e Put the feet on opposite sides of a board and twist the gauge so both feet are firmly in contact with the board surface. The 1mm hole in the Base will be at the exact center of the board. Put a mechanical pencil in the hole and you can slide along the length, scribing the center perfectly.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Hole and Groove Depth Gauge.\u003c\/strong\u003e\u003cspan\u003e Last but not least, there’s a 1\/8\" diameter rod with a scale to read the depth of any hole or groove too small for the sliding block.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eThe 6-IN-1 Pocket Gauge\u003c\/strong\u003e\u003cspan\u003e has an adjustment range of 2-1\/8\" between the base and the sliding block.  The depth rod on the Pocket Gauge will reach 2-1\/8\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e6-IN-1 Shop Gauge\u003c\/strong\u003e\u003cspan\u003e has an adjustment range of 4-1\/4\". The depth rod on the Shop Gauge will reach 3\". \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou have your choice of larger capacity with the Shop Gauge or convenience with the Pocket Gauge. Both sizes include a wall-mountable Rack-It™ to store your 6-IN-1 when it’s not in use. Or, save some money by getting them both. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, \u003c\/strong\u003ethe 6-IN-1 Pocket Gauge and Shop Gauge are precisely machined and carefully inspected in our Strongsville, Ohio facility (\u003cem\u003ejust south of Cleveland\u003c\/em\u003e). \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan data-sheets-root=\"1\"\u003eProtected by US PATENT No. \u003c\/span\u003e\u003cspan data-sheets-root=\"1\"\u003eD870,574.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Pocket Gauge","offer_id":43531182800955,"sku":"6N1POCK-24","price":159.99,"currency_code":"USD","in_stock":true},{"title":"Shop Gauge","offer_id":43531182833723,"sku":"6N1SHOP-24","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Deluxe Set","offer_id":43531182866491,"sku":"6N1SET-24","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/6-in-1_24-01-a.jpg?v=1779298989"},{"product_id":"12-in-1-layout-tool-and-adjustable-square","title":"12-In-1 Layout Tool and Adjustable Square","description":"\u003cp\u003e\u003c!-- x-hugerte\/html --\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eWoodpeckers 12-IN-1 Layout Tool and Adjustable Square Does the Job of All These\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul class=\"compact\"\u003e\n\u003cli\u003e\u003cstrong\u003e12\" Rule\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eT-Square\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTry Square\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBevel Gauge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompass\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMarking Gauge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDivider\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDepth Gauge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter Gauge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtractor\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMiter Square\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInside Measurement Scales\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA pair of close-tolerance\u003c\/strong\u003e grooves machined in the center of the base scale capture the adjustable scale dead square. This forms the foundation of the T-square, Marking Gauge and Depth Gauge. A similar set of grooves at the end of the base scale locates the adjustable scale for the Try-Square and Diameter Gauge functions. There's a scribing guide\u003cstrong\u003e \u003c\/strong\u003e1\/8\" from the end of the adjustable scale. Just drop in a pencil, slide the base scale along your material and mark precisely parallel to the edge. Go ahead…test these functions against your most trusted square reference. We're confident you'll find them to be well within acceptable working limits. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe base scale is engraved\u003c\/strong\u003e\u003cspan\u003e with angle alignment guides for 30°, 45° and 60° angles. When you're working with non-standard angles, simply match the angle you need with the bevel gauge function and transfer it to your workpiece. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe sliding nature of the tool \u003c\/strong\u003e\u003cspan\u003ebrings utility to the scale. Not only do you have an accurate 12\" rule, but you can adjust it to check inside dimensions and use it as a beam compass to draw perfect arcs. Hinge it around to use the square ends as a divider that will transfer a dimension accurately without measuring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou won't find a more convenient tool \u003c\/strong\u003e\u003cspan\u003eto keep close at hand when you're in the shop working on furniture and cabinetry layout. Unlike the nearly-100-year-old originals, the stainless steel blades have a non-glare satin finish with crisp, dark laser-engraved scales. We hold the scales to a tolerance of .004\" total accumulated error, so they're as accurate as they are easy-to-read. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products, \u003c\/strong\u003e\u003cspan\u003ethe 12-IN-1 adjustable square is precisely machined and carefully inspected in our Strongsville, Ohio, facility (just south of Cleveland). This former OneTIME Tool has now joining our permanent product line-up. \u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Inch","offer_id":43531937775675,"sku":"12IN1TOOLI-24","price":56.99,"currency_code":"USD","in_stock":true},{"title":"Metric","offer_id":43531937808443,"sku":"12IN1TOOLM-24","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/6652\/2939\/files\/12-in-1_tool_24_01_1.jpg?v=1779318208"}],"url":"https:\/\/woodpeck.com\/collections\/measuring-gauges.oembed","provider":"Woodpeckers","version":"1.0","type":"link"}